機床商務網
詳細介紹
可靠的自動化刀庫
Reliable automatic tool library
自動換刀裝置由刀具庫和換刀臂組成。自勤換刀裝置輿機床分開安裝，目的是防止自動換刀裝置運轉時的振動或其它原因?qū)庸ぞ犬a(chǎn)生不利的影響。選刀采用短路徑固定地址方法。所有的刀具均返回原位，因此有關大尺寸刀具的碰撞問題僅需在安裝時考慮壹次。
Reliable automatic tool library
The automatic tool changing device consists of tool library and tool changing arm. Self-service tool changer is installed separately from machine tool in order to prevent the vibration of automatic tool changer or other reasons from adversely affecting the processing accuracy. The shortest path fixed address method is adopted in tool selection. All cutters return to their original position, so the collision problem of large-sizedcutters only needs to be considered once during the first installation. The shortest path is adopted in the two-way tool library.
快捷而簡便的日常檢查
• 潤滑控制單元與氣壓單元都集中安裝在機床的操作側，便于日常維護時的檢查。
Quick and Simple Daily Inspection
Quick and Simple Daily Inspection
• Lubrication control unit and air pressure unit are centrallyinstalled in the operation side of the machine tool, which is convenient for routine maintenance inspection.
重視作業人員工作效率的設計
• 既拓寬了作業人員的踏板，縮短了工件和操作面板間的距離，有助于提高操作與裝夾作業的效率，并提高操作者的安全性。
Emphasis on the design of operators'work efficiency
• It not only enlarges the pedals of operators, shortens the distance between workpieces and operation panels, but also helps to improve the efficiency of operation and clamping operation, and improves
the safety of operators.
排屑處理
•通過中心槽從主軸正下方直接排出切削
• 護罩使得切屑不堆積，保持加工室內清潔排屑處理
Chip removal
•Cutting is directly discharged from the lower part of the spindle through the central groove.
•The shield keeps the chips from piling up and keeps the processing room clean.
液壓系統
• 彩用那智不二越液壓站，穩定性高。
• 彩用那智不二越液壓站，穩定性高。
Hydraulic system
•The color use of Nazhiyiyue hydraulic station has high stability.
| 型號 Model | H500(II) | H630(II) | H800(II) |
| X 軸行程 X-axis travel | 750mm | 1050mm | 1300mm |
| Y 軸行程 Travel 丫-axis | 750mm | 1000mm | 1200mm |
| z 軸行程 Z-axis travel | 750mm | 1000mm | 1200mm |
| 主軸中心至工作臺面 Spindle Center to Workbench | 50-800mm | 80-1080mm | 45-1245mm |
| 主軸鼻端至工作臺中心 Spindle nose end to worktable Center | 135-885mm | 135-1135mm | 150-1350mm |
| 主軸錐度 Spindle taper | BT50 | BT50 | BT50 |
| 主軸轉速(標配）Spindle speed (standard) | 6000rpm/min | 6000rpm/min | 6000rpm/min |
| 主軸轉速(選配）Spindle speed (optional) | 12000rpm/min | 10000/12000rpm/min | 10000、12000rpm/min |
| 標配主軸 Standardized spindle | 直傳式 | 齒輪式 | 齒輪式 |
| 選配主軸 Selection of spindle | 皮帶式 | 電主軸 | 電主軸 |
| 盤面大小(長 X 寬）Disk Size (Long X Width) | 500X500mm | 6300X630mm | 800X800mm |
| 分割角度 Minimum Segmentation Angle | 1°(標配）0.001°(選配） | r(標配）o.oor(選配） | 1°(標配）o.oor(選配） |
| 工作臺載重 Maximum load of worktable | 600kg | 1200kg | 2000kg |
| 工作臺數量 Number of workbenches | 2pcs | 2pcs | 2pcs |
| 軸向傳動方式 Axial transmission mode | 直傳式 | 直傳式 | 直傳式 |
| 切削速度 Cutting speed | 1-10000mm/min | 1-10000mm/min | 1-10000mm/min |
| 快移速度 X/Y/Z Fast moving speed X/Y/Z | 24/24/24m/min | 24/24/24m/min | 24/24/24m/min |
| 刀庫容量 Cutter Storage Capacity | 24(40/60) | 40(60) | 40(60) |
| 選刀方式 Tool selection method | 隨機 | 隨機 | 隨機 |
| 刀具交換方式 Tool Exchange Mode | 刀臂式 | 刀臂式 | 刀臂式 |
| 刀具重量 Maximum tool weight | 20kg | 25kg | 25kg |
| 刀具長度 Maximum tool length | 450mm | 500mm | 600mm |
| 刀具直徑(無鄰刀）Maximum Tool Diameter (No Neighboring Tool) | cl) 105/200 | 0 125/225 | 0 125/225 |
| 刀柄規格 Tool handle specification | BT50/CAT50/DIN50 | BT50/CAT50/DIN50 | BT50/CAT50/DIN50 |
| 機床定位精度 Location Accuracy | 0.008mm | 0.008mm | 0.008mm |
| 機床重復定精度 Machine Tool Repeated Precision | 0.006mm | 0.006mm | 0.006mm |
| 所需氣壓 P「essu「e「equi「ed | 6-8MPa | 6-8MPa | 6-8MPa |
| 電壓需求 Voltage requirements | 45KVA | 70KVA | 70KVA |
| 水箱容量 Water tank capacity | 700L | 800L | 800L |
| 機器重量 Machine weight | 15000kg | 20000kg | 22000kg |
機床商務網