機床商務網
詳細介紹
Solar Simulator's Application：
Mainly used inautomatic test and result record of mono-crystalline silicon, poly-crystalline silicon solar module and thin-film module.
Solar Simulator's Features:
1. Flash impulse continuous adjustable range10-100ms
2. Four-line measurement; 14-bit 4-channel high-speedsynchronous
acquisition card, 8000 data collectingpoint;
3. 10 parameters display;measured parameter display intabulation and graphicway;
4. Irradiance automatically compensating; temperatureautomaticallycompensating;
5. Voice counts off and prompts of flash time;countingprompts of flash time
6. 24 consecutive hours of work, working life of imports.Xenon lamp is 300,000 times of flash
Parameter of solar simulators:
Model | YHMT-AAA | YHMT_A |
Lamp Spectrum | In line with IEC60904-9 and JISC8933(A Grade) | |
Light Intensity | 100mW/cm2 (continuous adjustable range20-120mW/cm2) | |
Light intensity non-uniformity | ≤±2%[A] | ±3% |
Instability degree of irradiation | ≤±2%[A] | ±2% |
Test results consistency | ≤±0.5%[A] | ±1% |
Test error of electrical properties | ≤2% | ≤2% |
Single flash time (customized for flexible panel) | 10ms-30ms~100ms | |
Effective Test Range | 1200*2000nm /5W-300W ( Can customized for big size) | |
Measuring Voltage | 0-100V(Resolution 1mV) | |
Measuring current | 0-20A(Resolution 1mA) | |
Environmental temperature | 15℃~30℃ | |
Test Parameters | Isc, Voc,Pmax, Vm,Im,FF,EFF,Temp,Rs,Rsh | |
Power | 110V/220V~ 50Hz /60Hz | |
機床商務網